Typical Components
(1) Concrete slab
(2) Screed or mortar/sand-cement bed
(3) Finishes/wearing surface
(4) Saw cut
(5) Metal support frame
(6) Seal
(7) Thin-bed adhesive
MicrAtec Overview
MicrAtec Series
Control Joint for Floors
MicrAtec is a unique movement joint for all floors with hard finish,
from industrial floors to living rooms. The profile replaces the well-known sealant joint and other smaller profiles in floors.
Type A
Control joints installed with finishes laid on a thin bed adhesive 2 to 5mm deep.
Type B
Control joints that are compression fitted into a slot or saw-cut formed between finishes/wearing surface.
Type C
Control joints that are installed as finishes are being laid on wet mortar or a sand/cement bed.
[product_category per_page=”12″ columns=”4″ orderby=”ID” order=”ASC” category=”micratec”]
